Synergy Electronics

Importers and distributers of high quality product brands to the New Zealand Electronics and Service Industries.
www.synergyelectronics.co.nz

FERO

Manufacturing solutions provider of wiring and assembly requirements for the technology sector.
www.fero.co.nz

Circuit Labs Ltd

Printed Circuit manufacturers offering fast turn around services on single sided, double sided and multi-layer board of 3 - 6 layers
www.circuitlabs.co.nz

Future Electronics

Future Electronics Inc. is a distributor of electronic and electro-mechanical components headquartered in Pointe-Claire, Quebec. Founded in 1968 by reclusive billionaire Robert Miller, the company is one of Quebec's largest privately owned companies and is currently the fourth largest electronics distributor in the world. It operates in 169 locations in 42 countries in the Americas, Europe and Asia.
www.futureelectronics.com

Arrow Components

Arrow Electronics is a global provider of products, services, and solutions to industrial and commercial users of electronic components and enterprise computing solutions.
www.arrow.com

Digikey Electronics

Worlds largest selection of electronic components available for immediate shipment.
www.digikey.com

Element 14

element14 is a high-service distributor of technology products, services and solutions for electronic system design, maintenance and repair.
nz.element14.com

Panel dimensions   Maximum panel dimensions of 400mm x 250mm.
Panel should have a minimum of 3mm clearance along the
X axis to allow for travel on the conveyor.
Panel Fiducials/BOC Markers   At least 2, preferably 3 fiducials per panel, located at opposite corners of the panel.
The fiducials should not be covered by any solder mask, and should be HAL/Ag/Au finished.
Fiducial Specifications   Shape: round
Size: 2mm diameter
Clearance: 1mm
Tooling Holes   Although almost any size tooling holes are acceptable, at Compuspec our preference is 4mm diameter.
Solder Paste Stencil   We have options of using either a 20" QuickFrame stencil or a 29" Framed Stencil. The location of the panel apertures should be in the middle of the stencil, it is sometimes possible to place 2 artworks on the same stencil, or top and bottom artworks (20" QuickFrame).
The 29" Framed stencil should have fiducials half etched on the non-squeegee side of the PCB.

 

Our expertise in design engineering could be the solution to the incorporation of electronic technology into your products without the need for employing your own in-house engineers.

Our team of World Class engineers have vast experience in all aspects of electronic design including: Over 20 years experience in the telecommunications industry.

    Broad experience in different areas of development including:
  • Telecommunications
  • Automation
  • Wireless Communications
  • Security
  • Embedded systems
  • Remote data logging
  • Embedded TCP/IP communications
  • Remote in-circuit programming
  • PC Software/Database development
  • Printed Circuit Board layout/design
  • RF ID / Smart Cards

We have a proven reputation for innovative design, both with our own products and products that we have developed for customers. References can be obtained to support our abilities from well-satisfied past and present users of our expertise.

Our team values integrity as the absolute crux of all business relationships. Your intellectual property is at the core of your business and will be fiercely protected.

We pride ourselves in striving for excellence in all that we do. Our team's customer focus is best portrayed in the philosophy they use to describe themselves, "If we are going to expend the time and energy to make a product and provide a service, then we will set the goal to perform it flawlessly - flawlessly as defined by the customer"

We have our own electronic production facility that can be utilised for prototyping and production runs. This in-house facility gives us the advantage that products are designed with a focus on volume manufacture (Design For Manufacture).

Maximum Panel Size   400mm x 250mm x 4mm
Component Throughput   up to 22,000 cph
Smallest Component   0402 chip
Feeder types   8mm / 12mm / 16mm / 24mm / 32mm
Belt Stick Feeders
Vibrator Stick Feeders
Trays
Through Hole / Hand Assembly   Facilities for pre-forming and hand placement of through hole components.
Wave Solder   Wave soldering of leaded components.
Access to custom-made carriers where there is SMD components on both sides, should this be a requirement, there are certain design criteria that need to be followed for the bottom placement of SMD components.
Testing   When test equipment is available, if required we can perform online testing.
Final Assembly   If required, we will do final assembly of the product to your requirements.
 

At Compuspec we are keen to assist local and international innovators to deliver leading technology onto the world stage. We aim to deliver a manufacturing partnership that provides you the benefits of an in-house manufacturing operation, but with the risk reduction and efficiency associated with contracting.

    Things we know:
  • Managing the quality and cost of manufacturing is high on the list of priorities for small, design-focused companies looking to make an impact in their chosen market.
  • Compuspec assists companies to achieve their dream of exporting their technology by using our expertise to deliver up-to-date manufacturing solutions while focusing on improving efficiencies and driving your costs down.
  • We have a team of engineers passionate about solving design problems, both in terms of product performance and manufacturability.
  • We are an honest, hardworking team and pride ourselves in our determination to do everything we can to meet our customers' needs.
  • We understand your intellectual property is at the core of your business and will be fiercely protected.
  • We are the most flexible and responsive manufacturing solution you will find.
  • We like to challenge assumptions.

If you haven't challenged your manufacturing assumptions lately, give us a call and arrange an informal tour of our factory and introduction to our team. We are happy to throw around some ideas so you can get a feel for the opportunities that having Compuspec as a manufacturing and/or design partner may offer.