Both the Panelux GEN III and Panelux JNR have these 3 mounting options, Surface Mounted,  Cavity Mounted and Flush Mounted. The Panelux GEN III can also be T-Rail mounted (for suspended ceilings).

Surface Mount

The Surface Mounted option is supplied with a bracket assembly, an optional Gear Tray is available to hold the transformer.  This bracket assembly facilitates the tilting of the the fixture in 5° increments, allowing the light to be directed where it is most needed.

The bracket has 10mm mounting holes on 170mm centres.

Cavity Mount

When Cavity Mounted, the transformer either sits on top of the cavity or inside the cavity.  With the correct cavity dimensions, the luminaire can simply be seated on top (similar to T-Rail mounting) or be screwed in place making use of the 8 mounting holes in the luminaire frame.

Flush Mount

Flush Mounting the luminaire is likely the simplest method and requires no additional hardware.  A small offset hole of 50mm for the power cable connector and air vent is all that is needed to allow for this luminaire to be flush mounted.  With the power cable feeding from the back, the light can be flush mounted on a wall or ceiling using the 8 screw holes in the frame. The mounting wall or ceiling needs a minimum of 40mm depth for the power connector.  The transformer is located either behind the wall or on top of the ceiling.

T-Rail Mount

The Panelux GEN III must be ordered with the T-Rail frame already fitted.  The installation is then simply removing an existing ceiling tile and dropping in the Panelux GEN III luminaire.  The T-Rail mount is designed to fit a 600mm x 600mm ceiling tile space.  The transformer can either sit on top in the ceiling space or (as a safer option) be tied to or sit in the cable tray holding all power cables off the ceiling tiles.

Networked (Wirelessly)
Individual luminaires and control devices can exchange information to make intelligent decisions either independently or area, building or site wide.
Occupancy Sensing
Light levels are adjusted based upon presence or absence of people in specific areas. Movement can be pre-empted through communication amongst surrounding fixtures.
Daylight Harvesting
Automatically monitor natural daylight and reduce energy use accordingly.
Fork Lift Interaction
Senses fork lift activity and maintains a programmable pool of light in a radius around any number of moving or stationary fork lifts.
Task Tuning
Ability to set light levels for individual or groups of luminaries to suit task specific requirements.
Software Reconfigurable Zoning
Ability to group luminaires into virtual zones to respond to sensor inputs (such as occupancy or daylight harvesting).
Continuous Dimming
Power levels are proportional to dim ratio, which is adjustable from 0%-100%. Provides minimal step change for occupants.
User Interface
Setup over the air using Laptop or PC application.
Sensors are integrated into the luminaire as is the network interface. Simple, reliable and rugged.
Distributed Intelligence
Luminaries are autonomous and there is no reliance on central processors or gateways to provide reliable operation.
Plug and Play
Plug in power and go. System largely self configures with no need for complex commissioning. This enables very rapid installation and commissioning (>1,000 fittings in 3 days) with minimal site interruption.
Personal Control
Personal emitters can be provided to enable individuals to set preferences within a space (e.g. security guards)
Load Shedding (Demand Response)
Luminaires can respond to load shedding requests to reduce power demand. e.g. Emergency lighting or back up generator operation.
Temperature Monitoring
Ability to log environmental temperature conditions for 2D mapping of cool room operations.
Long Life
Designed for > 20yr fixture life. Uses the best components available and eliminates major points of component failure common in traditional driver technologies.
Improved Light
Improved levels of light and colour rendering results in less strain, improved task performance and fewer accidents.
System Upgrades
Over The Air upgrades enable customers to benefit from future developments in algorithms that deliver advances in operation and improved energy savings.